CLIPPER SHIP *PREMIUM* ALUMINUM FIBRE COATING
PRICE INCLUDES SHIPPING TO ANYWHERE IN THE USA
PRODUCT DESCRIPTION: Clipper ship Aluminum Fibre Coating meets ASTM-D-2824-85 Type III specifications and is 100% ASBESTOS-FREE. This material is an asphalt cutback blended with fibres and aluminum paste. BASIC USES: Clipper ship Aluminum Fibre Coating is a protective coating used to produce an ultra-bright aluminum reflective for all types of surfaces. LIMITATIONS: DO NOT HEAT container. DO NOT thin or exceed 900 rpm when mixing or applying or use a roller for application. DO NOT apply over soft asphalt or coal tar surfaces or areas that hold ponded water. DO NOT back-brush or disturb product after leafing process has begun or surface may brown. APPLICATION: Clipper ship Aluminum Fibre Coating must be applied to a surface that is dry and clean from all foreign matter. This material should be applied when the temperature is 50° F and rising. This material can be applied by brush or spray equipment (recommend airless or piston pump). The coverage rate should be 50-75 square feet per gallon. STORAGE: Clipper ship Aluminum Fibre Coating can be used year round and the only protection would be from weathering on the container. COMPOSITION: Asphalt Mineral Spirits Aluminum Paste Desiccant Fibre Diatomite CAS 8052-42-4 CAS 64741-41-9 CAS 7429-90-5 CAS 63231-67-4 CAS 9004-34-6 CAS 61790-53-2 This information is to assist customers in determining if this product is suitable for the proposed application, and to satisfy themselves as to suitability of the contents. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from law or patent implied.